SandCalc

Bulk material estimator · US units

Sand Calculator

Free sand calculator. Enter your area and depth to get cubic yards, cubic feet, tons, bags and cost in one order slip, with real sand densities built in.

Cu yd, tons and bags in one result Density built in Free, no sign-up
Order slip Cu yd · tons · bags · cost

The slip is pre-filled with a 20 × 12 ft example at 6 inches deep. Type your own measurements and it recalculates as you go.

Estimate—
Coverage area—
Volume before waste—
Order this much (with waste)—
Weight—
Bags —
Estimated material cost—

Enter your measurements to get an order slip you can read at the counter.

What this sand calculator gives you

Give it the area you are covering and how deep the sand should sit, and it returns five numbers on one slip: cubic yards, cubic feet, tons, the number of bags, and the material cost at whatever price you type in. Most calculators stop at cubic yards. That is not how sand is sold. A landscape yard quotes by the cubic yard, a quarry quotes by the ton, and a hardware store sells 0.5 cubic foot bags. You need all three numbers before you pick up the phone, so all three are on the same slip.

How to use it

  1. Pick the shape. Rectangle for beds and pads, circle for a sandbox or a fire pit ring, triangle for a corner bed, or "I know the square footage" if you already measured it.
  2. Enter the depth. Inches, feet or centimetres. Two inches is the usual topdressing depth; six inches is a sandbox.
  3. Choose a waste allowance. Five percent for a flat firm base, ten percent for typical ground, fifteen to twenty percent for soft fill or a deep lift. Sand settles and you will lose some to spillage.
  4. Type your local price. The default is a placeholder, not a quote. Replace it with the number your supplier tells you, and switch between per cubic yard, per ton and per bag.
  5. Read the slip. The bold line is what to order including waste. Copy it into a text message and send it to the yard.

The formula, step by step

Every material on this site uses the same four steps, so the arithmetic is worth knowing:

  • Square feet = length x width (or diameter squared x 0.785 for a circle, or base x height / 2 for a triangle).
  • Cubic feet = square feet x depth in feet. Two inches is 0.167 feet, six inches is 0.5 feet.
  • Cubic yards = cubic feet / 27, because a yard is 3 feet on each side and 3 x 3 x 3 = 27.
  • Tons = cubic feet x density in pounds per cubic foot / 2000.
  • Bags = cubic feet / bag size.

The waste percentage is applied to the volume before the conversions, so every figure on the slip already includes it.

Sand density: why two suppliers quote different tonnage

Density is the number that decides how much a cubic yard weighs, and it is the single biggest reason two quotes for the same job differ. The values used here are planning values for dry material:

  • Mason sand: 100 lb per cubic foot, about 1.35 tons per cubic yard.
  • Play sand: 100 lb per cubic foot.
  • Fill sand: 95 lb per cubic foot.
  • Concrete sand: 105 lb per cubic foot.
  • Manufactured sand: 105 lb per cubic foot.

Wet sand is heavier. A pile that sat through a week of rain can weigh ten to fifteen percent more than the same pile when dry, and some yards sell it damp because that is how it came off the dredge. When a supplier's tonnage is higher than this calculator, ask which density they used before you assume the estimate is wrong.

How far a cubic yard of sand goes

A cubic yard covers 324 square feet at one inch deep. Deeper spreads cover less:

  • 1 inch deep: about 324 square feet.
  • 2 inches deep: about 162 square feet.
  • 3 inches deep: about 108 square feet.
  • 4 inches deep: about 81 square feet.
  • 6 inches deep: about 54 square feet.
  • 12 inches deep: about 27 square feet.

If you know how many square feet you must cover, divide by the number in that list to get the number of yards.

A worked example

You are filling a 20 foot by 12 foot sandbox to 6 inches, using play sand at 100 pounds per cubic foot.

  • Area: 20 x 12 = 240 square feet.
  • Volume: 240 x 0.5 feet = 120 cubic feet.
  • Yards: 120 / 27 = 4.44 cubic yards.
  • With ten percent waste: 4.89 cubic yards to order.
  • Weight: 132 cubic feet x 100 = 13,200 pounds, or 6.6 tons.
  • Bags: 132 / 0.5 = 264 bags.

That last line is why the bag count matters. Buying 264 bags from a store costs far more than having 5 yards dumped in the driveway, so use the bag figure only for small touch-ups.

Which sand to order

  • Mason sand is fine, clean and compacts well. Use it under pavers, for a sandbox lid area, and for mixing mortar.
  • Play sand is washed and screened. It is the right choice for sandboxes and children's areas, and the wrong choice for a base that has to lock together.
  • Fill sand is the cheap, unscreened option for raising grade or filling a hole. Do not put it under pavers.
  • Concrete sand is coarse and angular. It is what you want for mixing concrete and for pipe bedding.
  • Polymeric sand is a joint filler, sold in bags only, and is not something you buy by the yard.

Access and delivery

A cubic yard of dry sand weighs roughly 2,700 pounds. A half ton pickup is rated for about 1,000 pounds, so it can carry less than half a yard, and a one ton truck is good for about 2,000 pounds. That is why most jobs over two yards are delivered rather than picked up. Ask the yard how far their conveyor or chute reaches: a truck that cannot get within twenty feet of the drop point means wheelbarrowing, and wheelbarrowing five yards of sand is a full day of work.

Mistakes that cost money

  • Measuring in feet and entering depth in inches without switching the unit. The slip will be twelve times too large.
  • Forgetting the waste allowance and coming up a few bags short mid-job.
  • Ordering fill sand under pavers to save money, then watching the surface shift within a season.
  • Ignoring the bag option for small jobs and paying delivery on a half yard.

Questions people ask

How many cubic yards are in a ton of sand? About 0.74 cubic yards at 100 pounds per cubic foot, because a ton is 2,000 pounds, which is 20 cubic feet, and 20 / 27 = 0.74. Heavier wet sand runs closer to 0.68.

How much does a cubic yard of sand weigh? Roughly 2,700 pounds when dry, a little over 3,000 when wet.

How many bags of sand are in a cubic yard? 54 bags if each bag holds 0.5 cubic feet, since a yard is 27 cubic feet.

How much sand do I need for a sandbox? Measure the inside length and width, then use six inches as the depth. A 4 foot by 4 foot box at six inches needs about 0.3 cubic yards, which is 8 cubic feet, or 16 bags.

Should I add extra for settling? Yes, ten percent on a fresh fill. Sand compacts underfoot and you will want the surface to finish where you planned.

Is this the same as a paver base calculator? No. Paver base is a crushed stone mix at about 110 pounds per cubic foot and it is ordered at a different depth, so use the paver base calculator for that job.

Estimates only. Confirm density and price with your supplier before ordering.